For special applications, our custom molding and fabrication programs are designed to provide unique solutions. Our team will help guide you through the process of specifying the correct material and (just as importantly) the correct manufacturing process, while taking into consideration your special requirements.

For special applications, our custom molding and fabrication programs are designed to provide unique solutions. Our team will help guide you through the process of specifying the correct material and (just as importantly) the correct manufacturing process, while taking into consideration your special requirements.

Lord mounts

LORD Corporation’s charge is to help you better serve your customers through the application of our expertise in solving problems. For over 75 years, we have led the way in developing solutions to manage motion and minimize the noise, vibration and shock that often result. We’ll partner with you to research and design a solution that meets your specific needs, either by developing a new application or capitalizing on our existing technologies. From vibration management systems to our well-known rubber-to-metal isolators and couplings, our goal is to improve the quality of your products.

• CBB and CBC Series
• SSB Series
• CB-2200 Series

Two-Piece Mounts are designed for applications involving severe dynamic forces in the static load direction, as well as the rebound direction. Travel is limited in both directions by rubber in compression that provides snubbing.

These mounts are designed to support engines, cabs and accessory units, accommodate frame racking and twisting while isolating vibration and absorbing shock.

Typical applications for Two-Piece Mounts include on-highway, off-highway vehicles, construction and industrial machines.

Features and Benefits

• Dynamically effective in all directions.
• Prevent mechanical transmission of noise.
• Accommodate misalignment and distortion.
• High rebound capacity.
• Easy to install with common tools.
• Standard bolt torque assures proper assembly.
• Top and bottom parts alike, cannot be misassembled.
• Fail-safe assembly.
• Sized for English and Metric bolts.
• Long dependable service life.
• Economical.

Click here for the Two-Piece Mounts Catalogue section: with tables of exact specs and full details…

These versatile mounts are available in three types, each type featuring square, diamond or holder configurations to suit a variety of design requirements. The three types, Plateform Mounts, Heavy-Duty Plateform Mounts and Multiplane Mounts, offer a range in load ratings from .5 to 600 pounds.

Snubbing washers provide an interlocking system of metal parts which act to prevent damage from overload or excessive shock impact.

Lord Plateform Mounts are easy to install and provide space efficiency. Typical applications include electronic equipment, business machines, medical equipment and small pumps, engines and gen sets.

• Lattice Mounts
• Chan-L™ Mounts
• Leveling Mounts
• Industrial Shock Mounts

Lord Machinery Mounts are designed to support heavy equipment and isolate intermittent or continuous vibration. The result is greater machine accuracy, longer service life, smoother operation and reduced maintenance. These mounts are available in four types to suit different needs.

Lattice Mounts are recommended for applications where disturbing frequencies are as low as 6 Hz. Their lattice design provides a soft vertical spring rate combined with lateral stability. Typical applications include shaker-screens, sifters, rubber mills, air compressors and large engines/generators.

Chan-L™ Mounts are recommended for machines where vertical disturbing frequencies are 600 cpm or higher. Their elastomer-supported channel design features a soft vertical spring rate. The design incorporates built-in protection against metal-to-metal bottoming. Typical applications include separating and grading screens and shakeouts.

Leveling Mounts provide the ability to level equipment and machinery. These mounts offer a vertical natural frequency under maximum load of 12 Hz. They are constructed of a neoprene elastomer, which resists oil, ozone and caustic materials, and a high-visibility yellow housing made of high strength steel.

Industrial Shock mounts efficiently control shock and structural noise transmission from heavy industrial machinery. Adjacent controls, sensitive instruments and precision machines are protected from impact disturbances that could hamper their performance. Worker comfort is increased, and building structures need less maintenance.

Features and Benefits

• High-efficiency, multi-directional isolation of low frequency vibration.
• Extremely rugged and require no maintenance.
• Easily installed.
• Long service life.

Click here for the Machinery Mounts Catalogue section: with tables of exact specs and full details…

• Standard Grommets
• Damped Grommets

Lord Grommet Isolators provide effective, economical vibration isolation for light loads. They are suitable for commercial and military applications including computers, disk drives, business machines, precision instrumentation and general industrial equipment.

Lord Grommet Isolators are designed and produced with the same kind of precision and care as our high performance bonded elastomeric mounts. This provides close control of stiffness and dimensions. You get the performance and quality you need at low cost.

Standard Grommet Isolators are made of neoprene and natural rubber. They provide good vibration isolation for disturbing frequencies above 30 Hz. Damped Grommet Isolators are made of SPE¨/D Elastomer. They are well suited to applications which involve limited sway space.

Features and Benefits

• Economical.
• Offer improved reliability in environments where harsh vibration and shock occur.
• Space saving.
• Oil resistant.
• Effective vibration isolation and shock protection for light load applications.

Click here for the LORD Grommets Catalogue section: with tables of exact specs and full details…

• Small sandwich mounts: Standard UNC and Metric Threads
• Medium Sandwich Mounts
• Large Sandwich Mounts

Flex-Bolt Sandwich Mounts are designed to protect equipment and machinery against damaging vibration. This family of mounts has excellent capacity for energy control.

Constructed with high-strength bonds and specially compounded elastomers, these mounts provide high load-carrying capacity and assure long life.

The simple design and unitized construction provide low-cost mounting systems which are compact, lightweight, easy to install and maintenance free.

These mounts are available in three size groups to suit a variety of applications. Small mounts are available in metric and standard (UNC) threads.

Typical applications include business machines, motorcycles, heating, ventilating and air conditioning equipment, light motors, appliances, shipping containers, feeders, compactors and vibratory rollers.

Features and Benefits

• Economical
• Compact and lightweight
• Easy to install
• Maintenance free
• Three size groups – small, medium and large
• Unitized construction

Click here for the Flex-Bolt Sandwich Mounts Catalogue section: with tables of exact specs and full details…

A series of highly flexible elastomeric couplings for accessory drives designed to eliminate lubrication and maintenance. Dynaflex LCR Coupling capacity is rated from 4 to 135 hp at 2000 rpm. These easily installed couplings reduce noise transmission and increase bearing and driveline life through

• Greater misalignment accommodation.
• Isolation of low frequency disturbances.
• Isolation of torsional shock.

Features and Benefits

The ring-type coupling line has been developed to overcome numerous torsional problems associated with vehicular and industrial driveline systems. The result is increased equipment life by protecting against torsional vibration, shock and misalignment. Significant benefits are

Misalignment Accommodation: elastomeric flexibility allows for large angular misalignment. For permissible misalignments, including axial and radial, see Table 1.

Vibration Isolation: low torsional spring rate is achieved with the elastomeric ring type coupling using rubber in compression. This allows for low system natural frequencies and isolation of first mode driveline disturbances in most driveline systems.

Shock Protection: isolates torsional shock, prevents backlash and protects system components, including bearings, from fatigue failure.

Long Service Life: Lord ring type couplings have proven themselves under demanding service conditions.

Maintenance Free: elastomer flexibility accommodates all motion without wear, eliminates the need for lubrication.

Noise Reduction: no metal-to-metal contact; elastomer attenuates structure-borne noise and isolates vibration from components that would act as noise generators.

Systems Engineering: Lord has in-house computer capabilities for multi-torsional analysis to assist in proper coupling selection.

Click here for the Dynaflex LCR Catalogue section: with tables of exact specs and full details…

• CB1100 Series
• CB1180 Series
• CBA Series
• CBA50 Series
• STA Series

Safetied Tubeform Series

Center Bonded Mounts isolate vibration, control shock and reduce noise due to structure borne vibrations. Available in a full range of rated load capacities and able to withstand shock loads of 10 g’s, these mounts effectively protect equipment and improve operator comfort. They are ideal for automotive, marine, railroad and industrial markets.

Center Bonded Mounts provide flexible suspension systems for mobile, transport-mounted or portable equipment. Typical applications include engines, cabs, fuel tanks, pumps, air conditioning units, compressors and industrial machinery.

Features and Benefits

• Vibration isolation in all directions.
• Noise attenuation.
• Easy installation because of one-piece design.
• Low cost installation.
• Long service life.
• Consistent performance because of permanently bonded design.
• Shock protection in all directions provided by cushioned snubbing, no metal-to-metal bottoming.
• Standard sizes available from stock.
• Space saving size.
• Captive installation after overload failure when recommended bolt, washer and nut are used.
• Accommodate English and Metric bolts.

Application Engineering Assistance

Frequently, vibration isolation problems require a system engineering analysis. Lord has the computer capability, as well as specialized programs, for analyzing engine/ transmission combinations. The output from this analysis is a mounting proposal that optimizes performance over the complete range of operating speeds. This service is available to you upon request.

Click here for the Center Bonded Mounts Catalogue section: with tables of exact specs and full details…

• Center Bonded Bushings
• Square Bonded Bushings

Center Bonded Bushings and Square Bonded Bushings are used in applications where the absorption shock, attenuation of noise, reduction of wear and elimination of lubrication is required.

Center Bonded Bushings are designed to be loaded radially and utilize a soft torsional spring rate to provide freedom in rotation. High radial restraint maintains the alignment between joined parts. They are not intended for use where extreme rotational motion will occur. Typical applications include heavy duty highway equipment, drilling equipment, harvesters, combines and industrial machinery.

Square Center Bonded Bushings accommodate angular movement and isolate vibratory disturbances in heavy equipment. These bushings combine a torsional spring with an elastomeric pivot and isolator. They provide positive torsional positioning and pivot action under the most demanding operating conditions. Typical applica­tions include wheel suspensions, vibratory feeders, mobile power equipment and vibratory cable layers.

Easy to install, the uncomplicated designs of the Center Bonded and Square Bonded Bushings provide initial economy, while the rugged elastomers and high strength bonding assure extended service life.

Features and Benefits

• Easy to install.
• Uncomplicated design provides initial economy.
• High-strength bonding assures extended service life.
• Minimal maintenance due to specially compounded elastomer.

Click here for the Bushings Catalogue section: with tables of exact specs and full details…

LORD is a manufacturer only.  Please contact Western Rubber & Supply, Inc. to purchase.

In today’s world, we demand higher speed and greater productivity, yet expect more comfort, more durability and more precision than ever before. That is why managing motion and its effects is critical — not only for the success and longevity of your products, but also for the security and satisfaction of your customers.

LORD Corporation’s charge is to help you better serve your customers through the application of our expertise in solving problems. For over 75 years, we have led the way in developing solutions to manage motion and minimize the noise, vibration and shock that often result. We’ll partner with you to research and design a solution that meets your specific needs, either by developing a new application or capitalizing on our existing technologies.

From vibration management systems to our well-known rubber-to-metal isolators and couplings, our goal is to improve the quality of your products.

WESTERN RUBBER AND SUPPLAY IS A LORD® Mechanical Products Authorized Distributor

Fast, Dependable Product Delivery

Expert Technical Assistance

Applications Support

925-960-8700

Access a summary of each category by clicking these images or access the entire catalog by clicking on the catalog link on the bottom right.

Our gap filling, thermal management product line consists of multiple product families.

Our thermal management materials have been engineered to provide an effective thermal interface between heat sinks and electronic devices.

Our thicker, thermally conductive, gap filling materials are available in thicknesses ranging from .010″ to .250″. Engineers have specified our advanced gap filling materials to help eliminate air gaps between heat generating devices and a chassis.

The versatile gap filler material may also be used in heat pipe assemblies, signal amplifiers and even as a vibration isolation material. Engineers have even used our gap filler to completely eliminate the use of cooling fans in electronic enclosures.

Western Rubber & Supply, Inc. also sells thinner thermal management products. The thinner materials are typically used as an interface between a power transistor, CPU or other heat-generating component and a heat sink or rail. Our materials provide engineers with a clean and efficient alternative to mica, ceramics or grease for a wide range of electronic applications.

As an added convenience, Western Rubber & Supply, Inc. is able to supply custom-cut pads to your specification.

Most materials are available with or without adhesive on one side.

WESTERN RUBBER & SUPPLY INC THERMAL BROCHURE 5-17-10 – PDF

Our line of electrically conductive elastomers includes and . We also sell and other specialty products.

EMI products can be can be molded, die-cut, extruded or fabricated, depending on the application. Let our professionals help you specify the right product for your needs. .

We also offer quick turnaround, custom widths and thicknesses for your convenience.

For your unique applications which require a higher level of performance, please ask about our other elastomer options.

(.)

All stock grommets are RoHS 2002/95/EC compliant

Our rubber grommets are typically used to protect wire, hose, pipe or other objects passing through a panel hole. They are also commonly used as vibration dampers, finishing components and even spacers.

When sized correctly, rubber grommets easily snap into your pre-drilled panel hole. Rubber grommets work well in plastic, metal or other sub-straights.

We offer a variety of standard rubber grommets and military rubber grommets

We stock hundreds of different sizes of rubber grommets and can also make custom grommets and other rubber components to your unique specification.

Our military rubber grommets meet the requirements of MS-35489 military regulations and range in a variety of inner diameters, outer diameters, and groove widths.

Rubber grommets can be made in various rubber compounds including, silicone, Buna-N, Viton® Neoprene and EPDM.

If you do not see the rubber grommets to fit your needs please contact one of our sales representatives and we will customize one for you.

Rubber Grommets – Catalog PDF